Facade Paints
|
Facade paints from Sto have been specially formulated for a long life and great coverage. All Sto paints are free of solvents and plasticisers, also making them safe for the environment, installers and end-users.
StoColor Dryonic
This new façade paint has micro-textures that allows water resulting from rain, dew and fog to run off the façade almost instantly, leaving the façade dry in no time at all. The façade also remains naturally clean and attractive because microorganisms cannot grow on dry surfaces.
Finish: Matt
Colour range: 800 colours
Pack size: 15 ltr
Coats: 2 coats
Consumption rate: Approx. 6.7-8.3 m² per litre
Approx. 2.5 - 2.78 m² per litre for 2 coats
Consumption rate is dependent on substrate.
Application: Roller, brush or airless spray device
StoColor X-Black
Heat reflective paint for deep and intense colours on insulated facades
Finish: Matt (with encapsulated film protection)
Colour range: 608 colours
Pack size: 15 ltr
Coats: 2 coats
Consumption rate: Approx. 5.6 - 6.7 m² per litre
Approx. 2.8 - 3.3 m² per litre for 2 coats
Application: Roller, brush or airless spray device
StoColor Jumbosil
Modified acrylate facade dispersion paint, ideally suited for masonry and other mineralic substrates. Weatherproof and colourfast.
Finish: Mineral Matt
Colour range: 800 colours (Full StoColor Range)
Pack size: 15 ltr
Coats: 2 coats
Consumption: Approx. 6-10 m² per litre
Approx. 4-6 m² per litre onto porous/textured substrates.
Consumption rate is dependent on substrate.
Application: Roller, brush or airless spray device
StoColor Maxicryl
Acrylate facade dispersion paint with high covering power and colourfastness. Suitable for masonry, brick/blockwork and synthetic render substrates.
Finish: Matt
Colour range: 800 colours (Full StoColor Range)
Pack size: 15 ltr
Coats: 2 coats
Consumption rate: Approx. 4.0-8.0 m² per litre
Approx. 2.5-4.0 m² per litre onto porous/textured substrates.
Consumption rate is dependent on substrate.
Application: Roller, brush or airless spray device
StoColor Crylan
Acrylate facade dispersion paint with high covering power and low surface tension, for use on mineral and synthetic substrates.
Finish: Matt
Colour range: 800 colours (Full StoColor Range)
Pack size: 5, 10, 15 ltr
Coats: 2 coats
Consumption: Approx. 0.3-0.4 ltr/m²
Consumption rate is dependent on substrate.
Application: Roller, brush or airless spray device
StoColor Metallic
Acrylate facade paint with an attractive metallic finish. For use on a wide range of substrates, including masonry, brickwork and synthetic renders.
Finish: Satin
Colour range: 55 metallic colours
Pack size: 5 or 10 ltr
Coats: 2 coats + undercoat with StoColor Jumbosil
Consumption: Approx. 0.15 litres per m²
Consumption rate is dependent on substrate.
Application: Roller, brush or airless spray device
StoColor Dryonic Facade Paint
A video demonstrating how StoColor Dryonic paint uses innovative technology, inspired by the fog-basking beetle, to both repel and channel water at the same time, leaving the facade to dry in no time at all.
Video clip | 02:30
Contact Sto
Please contact us if you have any questions or enquiries about Sto products, systems and services.
Harris International
Consultant for Sto Group GCC region
Call: +971 58 296 0404